There are several hazards and dangers associated with driving. What will occur on your trip from point A to point B is impossible to predict in advance. Naturally, we always hope to reach our destination without mishaps or harm to our automobiles, but things only sometimes happen as expected. The dreaded flat tire is among the most frequent car accident drivers.
Changing a tire may be relatively easy if you have done it previously and have a jack in the boot. Yet some unlucky drivers are left helpless when their tire blows up without a jack nearby! So, how can a tire be changed without a jack? If this describes you, you will be relieved to learn that changing a vehicle tire is possible without a jack.
The techniques you may use to elevate your car without a jack are discussed in this article, along with a step-by-step tutorial on changing a tire without a jack.
How to Change a Tire Without Using a Jack?
First, feel free to find yourself without a jack and a flat tire that needs changing. Depending on where you are, you will need to do different actions. For instance, if you are driving on a busy highway, you must safely pull over, turn on your hazard warning lights, and take yourself and any passengers to a safe location. A tow truck or roadside assistance will then need to be called so they can replace your tire for you.
Yet, if you have the appropriate information and a few basic tools, you can replace a vehicle tire without a jack. It is crucial to understand how to replace a vehicle tire without a jack, regardless of whether you get roadside assistance coverage or know exactly where all of your neighborhood specialists are located. Planning if difficulties arise when traveling is advisable since life may be unexpected there.
Without a jack, how can I lift my car?
A car jack is used to raise your vehicle off the ground. You can quickly change the flat tire and install the spare tire since the jack keeps the vehicle up. You must devise a different means to properly elevate your automobile to easily remove the damaged tire if you do not have a jack.
Employ a ramp
You can lift your car’s wheel off the ground with the ramp technique. A steel or plastic ramp is required; alternatively, a wooden ramp may be constructed. Nevertheless, remember that ramps have weight restrictions so ensure your automobile is light enough before using a ramp.
Put your ramp next to the healthy tire on the same side as the flat tire. As you carefully drive up the ramp, the flat tire will now be raised off the ground. Add additional blocks beneath the ramp if you cannot spin the flat tire freely; this will raise the tire higher off the ground.
Is Jack and ramp absent? Do not fear; there are other techniques you may use to raise your automobile safely.
Use incline and curb
You may also use footpath curbs and naturally existing slopes to your advantage to lift your flat tire off the ground. You will need to drive at an angle along the slope to do this. The front wheels will lift if you reverse into a hill at an angle, and the rear wheels will rise if you drive upward.
Apply a lever
Use the lever technique if there are not any adjacent slopes or curbs. Using a lever to move your automobile requires quite a bit of energy and muscle, so you may need help to accomplish it. You must first remove the tire from the sockets with a lug wrench. The next step is to utilize a long, sturdy piece of wood or metal as a lever; your choice must be able to carry the weight of the automobile.
To transfer the weight of the automobile, you will need to position a sturdy stone or thick piece of wood as the pivot point. Set the pivot point so that it is closer to your vehicle than it is to the end of the lever. This will prevent the pivot point from snapping and make raising the car simpler. Two persons will probably be needed for this technique. To raise the automobile, pull the lever downward with some power.
Put a sizable piece of solid wood or a stone beneath the vehicle to raise the tire off the ground.
The Ground-Up Approach
Keep going if you find yourself in a predicament with a flat tire and no ramp, natural slope, or anything to use as a lever to raise your automobile off the ground. Digging away the earth around your flat tire will provide access to it.
It would help if you drove your automobile until your flat tire is on open ground to replace your tire effectively utilizing this procedure. The axel must be placed between a block (or another sturdy cushioning material) and the ground. Dig the earth away from the tire using your hands, a stick, a wrench, or whatever else you can find.
The hole must be large enough to remove the flat tire and install the spare easily. Continue excavating until the block completely supports the automobile axle; at this point, changing the tire should be simple.
Without a jack, how to change a tire
If you ever need to replace a tire but do not have a jack, you may utilize a number of techniques. Identifying a secure way to access the flat tire is the first step. After choosing a secure approach, all that remains to be done is changing your tire.
This is a simple, step-by-step instruction sheet for changing a tire without a jack:
- Use a lug wrench to remove the lug nuts from the flat tire.
- Use a ramp, lever, slope, curb, or shovel dirt from beneath your flat tire to raise it.
- Elevate the vehicle until the tire can be turned easily and moves freely without obstructions.
- Ensure the emergency brake is applied and your vehicle is in “park.” If you have them, place blocks behind the tires on the other side of the automobile. It would help if you changed the tire while keeping your automobile in place.
- Remove each lug nut from the flat tire using the lug wrench.
- Remove the flat tire and put the spare in its place.
- Use WD-40 on the lug nuts to aid in tightening them. While changing the lug nuts, you may use a star screwdriver to ensure they are tightened uniformly.
- Until you can properly dispose of it, put your flat tire in the spare tire compartment of your boot (or until you can take it to be repaired).
- Remove any blocks or wheel chocks you used from behind the tires on the other side if you utilized them.
- Without using a jack, you have now successfully replaced your tire. Remember to check the pressure of the newly fitted spare tire using the tire pressure gauge. After a tire replacement, you should reset the TPMS on your vehicle.
FAQs
Without tools, how can a tire be changed?
A driver can replace a tire without a jack in various methods, but doing so would be quite challenging. Although you can raise your automobile tire without any equipment, removing the lug nuts without a spanner could be challenging.
Is a tire change simple?
Replacing a tire is simple and something that any driver should be able to do. Removing the lug nuts from the spare tire and reinstalling them securely might be challenging, but utilizing your body weight to assist you should work.
Do brand-new vehicles have a jack and spare tire?
Sadly, fewer automobile models now come with a spare tire and jack than in previous years. Just over 60% of autos in 2018 were found to have a temporary spare tire. The other 40% were devoid of spare tires but did include a sealant kit, a “run-flat” tire, and in certain instances, neither spare equipment nor tires.
What place is the jack?
Be sure you have searched in the appropriate spot for your automobile jack before attempting to repair a flat tire without one. The jack is often located in the boot of vehicles along with the spare tire. Lifting the floor covering will reveal the jack in your boot, which is located beneath. The jack should be beneath the cargo floor covering if you have an SUV.
Conclusion
A flat tire may be changed without a jack, and the process is simple. You may use various methods if you find yourself stuck on the side of the road with a blown tire and no jack. If you need to replace a tire without a jack in the future, remember how to do it by using the steps in this article.