The Honda CRV is equipped with a TPMS, or tire pressure monitoring system. The tire pressure indicator on your car’s dashboard is probably something you are familiar with if you have been driving for some time. When the system sensors detect that the pressure in one or more tires is below the advised value, the TPMS light turns on.
The fastest solution to this problem is to inflate your tires to the recommended pressure. The method for resetting the TPMS button depends on whether or not your vehicle has a touchscreen. It is located to the left of the steering wheel.
This article includes instructions for resetting the TPMS on a Honda CRV that are simple to understand.
What Does a Honda’s TPMS Stand For?
Tire pressure monitoring system is referred to as TPMS. This system keeps track of each tire’s pressure and issues a warning if it notices that it has dropped 25% below the acceptable level. The TPMS system will then turn on a warning light on the dashboard of the automobile.
Messages on the maintenance information display may also show depending on the automobile model.
Where Is the Button for the TPMS?
Your Honda CRV’s TPMS reset button is quite easy to locate. You may find it by just looking to the left of your steering wheel.
The button may be found in the settings tab if you have a newer Honda CRV with a touchscreen, but more on that later in the post.
When Should the TPMS Be Reset?
It might be challenging to determine when your TPMS reset button needs to be reset. So when and why should you reset it?
Resetting your TPMS is obviously worthwhile since driving with low tire pressure may really be rather hazardous to your car. So, it has to be reset to ensure that it is still trustworthy. So why else should the TPMS be reset?
- Tire rotation: Whenever you rotate one or more of your tires, it’s a good idea to reset the TPMS system to ensure that the reading is accurate.
So, it is certainly worthwhile to reset your Tire Pressure Monitoring System if any of this maintenance has recently been performed on your automobile, which is quite typical. If you don’t, your tire pressure reading may not be accurate, which might be dangerous!
Your system could believe that you’re still operating on reduced air pressure if it isn’t reset, in which case the LED might not even turn off at all.
So once you’ve done these things, how can you reset it?
How to Reset the Honda CRV’s TPMS
You may reset the TPMs on your Honda CRV in a variety of methods.
While Using a Touchscreen
You shouldn’t worry too much if you have a Display Auto Touchscreen since it’s rather easy to reset the device.
Step 1
Choose settings from your home screen.
Step 2
The next step is to pick a car by clicking on it.
Step 3
A few choices, like “clock,” “info,” and “camera,” will be available to you after this. You should click on “Car.”
Step 4
After selecting TPMS Calibration, just click “calibrate” to finish. It just takes a few clicks to do it, therefore it is very simple.
In the absence of a touchscreen
Don’t worry, it’s not over if your display doesn’t have a touchscreen. The buttons on the steering wheel make it simple to input the necessary orders.
Step 1
Scroll to the settings panel using the buttons, then press enter.
Step 2
The next step is to choose TPMS Calibration using the enter button located to the left of the steering wheel to access a different menu.
Step 3
You may now click calibrate to finish. You can still reset your TPMS even if your vehicle doesn’t have a touchscreen.
Aged CRV
The steering wheel controls to reset your TPMS system can be somewhat different if you have an earlier CRV model.
You’ll want to use your steering wheel controls in a manner that is the same as what we’ve previously described, but with a few minor differences, so pay careful attention.
You should first click on the “menu” button before moving on to “customize settings”. Following this, everything is quite simple, so don’t worry. Click “initialize” after selecting TPMS Calibration. It’s crucial to confirm, so be sure to press the “yes” button.
CRV For an Extremely Old
To access the TPMS system settings, your CRV may not have a touchscreen or any other display if it is an earlier model. So don’t worry, we insure you.
On the left way of the steering wheel, there will be a TPMS button for you to press. Be careful to hold down that button when pressing it to reset the system. After your warning light has flashed twice, you’re done.
Conclusion
So don’t worry if you need to reset your TPMS; we’ve got you covered. Remember that the TPMS system is not out to get you; it is there to alert you so you won’t have to check it yourself, which is great news for us lazy people. Even yet, we acknowledge that the light may sometimes be a nuisance.
The resetting procedure varies somewhat depending on the kind of CRV you have, but they are all essentially the same.