As time goes on, vehicles become more and more complicated. It may be challenging to stay updated with all the new technologies and features accompanying them.
P0017 – When you scan your Chevy Traverse, one code you can encounter is “B” for Crank/Cam Position Correlation Bank 1 Sensor.
This page will explain the meaning of this code, the location of the sensor, and any potential fixes.
The P0017 code indicates a problem with the correlation between the crank and cam position sensors on Bank 1 in a Chevy Traverse.
The engine may run rough and lose power if there is a mismatch between these sensors. The sensor above is situated on the side of the engine, next to the firewall. It is a cylindrical black object with two wires protruding from it.
What is Bank1 Sensor B?
The engine’s side, on which cylinder number one is located in the bank, is in issue. The sensor being discussed in this code is the second one on that side of the engine.
When this sensor is out of line with the crankshaft, it may lead to various issues, including camshaft position monitoring.
It is a good idea to take your Traverse to a mechanic to have them have a look if it has this code. The sensor, the wiring, the engine’s timing, or any of these things might be the source of the problem.
Where is the A Bank 1 Camshaft Position Sensor Found?
You’ll find the camshaft position sensor on the side of the engine, next to the firewall. It is a cylindrical black object with two wires protruding from it.
What location is Camshaft Position Sensor B in?
The camshaft position sensor B is on the side of the engine, next to the firewall. It is a cylindrical black object with two wires protruding from it.
What Are the Chevy Traverse P0017’s Symptoms?
Failure to launch
If the engine in your automobile won’t start, a P0017 error code might be to blame. The P0016 (Crank Position Sensor “A”), P0340 (Camshaft Position Sensor), or P0335 (Crankshaft Position Sensor) codes are often present with this one.
The cam and crank position sensors are out of alignment, which results in the P0017 code, which prevents an engine from starting. The engine will only turn over if these sensors are in sync since it won’t know where it is in the rotation.
Power Outage
P0017 is the code responsible for any power loss your Chevy Traverse is experiencing. Lack of engine power may result in several issues, including stalling, sluggish acceleration, and slowing down.
Rattle Coming from the Motor
Have you heard an odd rattling sound coming from the engine of your Chevy Traverse? And if so, P0017 may be the reason. Sometimes, this code might cause a rattling sound that becomes louder as you drive. The mismatch of the cam and crank position sensors is the cause of the rattling.
“Service Engine Soon” Light
There’s a strong probability that P0017 is the error code you need to fix if the “Service Engine Soon” light illuminates your Chevy Traverse. When an engine issue has to be resolved right away, this light will turn on.
How Can the Chevrolet Traverse Code P0017 Be Fixed?
Problems with the wiring
The P0017 error code may often be brought on by damage to the wire harness. A correlation problem between the crank and cam position sensors may arise if the wire is broken or rusted.
The cabling from and to the crank/cam sensors is often susceptible to vibration and exhaust. In light of this, it’s crucial to examine the wiring for any indications of damage and repair it as required.
You’ll need to swap out the wire harness to resolve this issue. Leave this to a qualified technician since it might be challenging.
Bad sensors
You must first examine the wiring before checking the sensors themselves for issues. A defective sensor might cause the P0017 error code. Testing a sensor using a scanner is the best approach to determine whether it is defective.
Put the scanner in “read mode” before reviewing the sensor results to test the sensor with a scanner. If the results fluctuate, the sensor is probably defective.
If a sensor is defective, a replacement must be purchased. It’s better to leave sensor replacement to a qualified technician since it might be challenging.
By disconnecting the old one and putting in the new one, you may replace it. Ensure that your chosen sensor is the right one for your Chevy Traverse. For many automobile models, there are different sensors.
Misaligned Timing Chain
Timing chain misalignment is another frequent source of the P0017 error code. The cam and crank position sensors may not be aligned if the timing chain is off. Utilizing a scanner to look at the timing markings is the best approach to determine if the timing chain is out of alignment.
Qualified mechanics should only fix timing chains that are out of alignment since it is a challenging and sometimes hazardous job.
Bad Engine Control Module
The P0017 trouble code could be caused by a defective engine control module (ECM). The cam and crank position sensors may be out of alignment if the ECM is not operating correctly. Testing the ECM using a scanner is the best approach to determine whether it is defective.
If the ECM is defective, a replacement will be required. It’s advisable to leave installing an ECM to a qualified technician since the procedure might be challenging. By disconnecting the old one and putting in the new one, you may replace it.
Ensure the ECM you purchase is the right one for your Chevy Traverse. For many automobile models, there are different ECMs.
Crank/Cam Reluctor Ring Issues
The Crank/Cam Reluctor Ring may also contain the P0017 error code. The cam and crank position sensors are communicated with through this ring.
The sensors may be out of alignment if the ring has an issue. Testing the ring with a scanner is the most effective technique to find out if there is an issue.
A qualified technician will be required to replace the ring if there is a problem.
What Other Error Codes Does the Chevrolet Traverse Have?
P0016 Code
Although this code is for the cam position sensor bank two, it is comparable to P0017. The cam position sensor bank two needs help if you’re obtaining the P0016 error code. The wiring, sensors, and timing chain should all be checked as the best course of action for this code.
P0335 Code
This code addresses the Crank Position Sensor. This code indicates an issue with the crank position sensor if you are experiencing it. The wiring, sensors, and timing chain should all be checked as the best course of action for this code.
P0011 Code
This code indicates the Intake Camshaft Position (ICP) sensor. If you are receiving this signal, it indicates that the Intake Camshaft Position (ICP) sensor is malfunctioning. The wiring, sensors, and timing chain should all be checked as the best course of action for this code.
P0014 Code
This code indicates the Exhaust Camshaft Position (ECP) sensor. If you receive it, this signal indicates an issue with the Exhaust Camshaft Position (ECP) sensor. The wiring, sensors, and timing chain should all be checked as the best course of action for this code.
P0300 Code
This code is for an accidental discharge. If it displays, this code means the engine has a problem. The wiring, sensors, and timing chain should all be checked as the best course of action for this code.
Conclusion
In conclusion, an issue with the correlation between the cam and crank position sensors in bank 1 is indicated by the P0017 Code on the Chevy Traverse.
Timing chain misalignment, a defective engine control module, issues with the crank/cam reluctor ring, and issues with the cam or crank position sensors are a few of the possible reasons for this code.
The wiring, sensors, and timing chain should all be checked as the best course of action for this code. Taking your automobile to a qualified technician is advised if you need help fixing the code.
